Rejuvenate Your Outdated Vases – DIY Plaster Vase

Do you have an old vase that is perfectly functional but look so outdated that you just don’t use it anymore?.

Here’s a great way to modernize that vase that has seen better days and make use of it again.

Tutorials are often the best way for beginners to get started with a new craft. And this tutorial is no exception! With just a few materials, you can have your own DIY Plaster Vase in no time at all.

It has all the instructions and guidance needed so you can rest assured that it’s something anyone can do.

Here’s how you can bring that old vase into the 21st century…

Read the full article here.

Also checkout out post on Inspired Decor Ideas To Decorate a Small Room and our popular post about Industrial Farmhouse Decor

Replacing a Front Door is a Simple Way to Add Curb Appeal

Replacing your old front door a new door is a great way to add curb appeal to any home.

While there are many benefits to having a new front door, the main benefit comes from the appearance. A brand new front door is much more appealing than an old and weathered one, and it can help increase your home’s resale value.

Just like in fashion, when it comes to house design and style, trends come in and out of popularity. The same can be said for homes themselves – what was popular decades ago may not be popular today. With that being the case, updating your home’s exterior with a brand new front door may be just what you need do to get that curb appeal back!

Here’s how you can do it… Read the full article here.

Checkout our recent post: Inspired Decor Ideas To Decorate a Small Room

How to Clean a Sofa – Various Fabric Types

How to Clean a Sofa – Various Fabric Types

Clean your sofa with these handy tips

No matter what material your sofa is, you can make sure it stays looking great when you know how to clean a sofa properly.

When we use our sofa continuously, we can have a hard time keeping it clean, free from crumbs, dust, and stains. If you picked the best sofa, but your children keep climbing all over them, your pets sleep on them, and a lot of us like to eat from our trays on our laps every now and then, it’s no wonder that they don’t stay as good as they did when they were new. It doesn’t matter whether you have a soft fabric sofa, a silky velvet sofa or a sophisticated leather sofa – we have ideas for keeping any sofa looking good!

When it comes to cleaning sofas, there is no ‘one size fits all’ rule. The type of cleaning product to use (solvent based or water based) and how best to wash your couch will depend largely on the fabric of the sofa and if the covers are loose or fitted.

Several people find the covers do not go on the same way after being washed or they look out of shape after washing them in the washing machine. In order to avoid these problems, manufacturers usually recommend dry cleaning. Some, on the other hand, swear they come out like brand new when they wash loose covers in a wool wash. Depending on your level of bravery, you might want to wash the sofa covers yourself.



A regular maintenance routine is also vital when it comes to keeping your sofa clean, so using a vacuum or brush it every week will keep it looking great and reduce the amount of dirt that accumulates and wears out your sofa’s fabric. If spills happen, dab them up with a paper towel or soft cloth, rather than rubbing at them, which can make the spill sink even deeper.

How to clean a sofa – different fabric types

Cleaning a leather sofa

Sofas made from leather are durable and easy to clean, but how can you maintain them?

1. Make sure it’s vacuumed
If you have a brush attachment for your vacuum, use it to avoid scratching your leather upholstery.

2. Remove dust
If dust has buildup, remove it with a clean cloth. Avoid using water or cleaning agents since some leathers are delicate and may stain.

3. Use a product specifically made for cleaning leather
Wipe the leather cleaner gently over the sofa using circular motions. When you use a quality care kit to clean and condition your sofa, you will be able to restore its sheen and softness. The leather should be treated twice a year with this conditioner to prevent losing its color or becoming dry.

Cleaning a fabric sofa

When you know how to clean a sofa, even light-colored fabrics, such as neutral and grey sofas can be easy to clean.

1. Remove any dirt from the surface
You should remove all pillows and throws, check the sides and back of the couch for loose change food wrappers, then vacuum it using the upholstery attachment. All cushions should be vacuumed, including the seams and crevices.

2. Examine the label
Please check the label of your sofa before you begin cleaning the covers.

  • W – Water-based cleaners are the only ones you can use. S or P indicate that it must be cleaned with solvents (only dry cleaning).
  • SW and WS indicate that you can use either a water-based or solvent-based cleaner. The use of a steam cleaner is OK as well.
  • Surfaces with an X can’t be cleaned with water or detergent – they must be professionally cleaned. To prevent stains from forming on cushions, you should wipe down the cushions with a clean, damp cloth for dust and dirt removal.

3. Eliminate stains and smells
It is possible to remove stains and spills at home with some simple remedies. White vinegar is a natural stain remover and is OK to be used on most types of upholstery fabrics. You can use a microfiber cloth to wipe the stain away gently using an equal parts vinegar and water solution (make sure the cloth is new). To remove any lingering vinegar smell, rinse the cloth with mild detergent and tepid water and allow it to air dry. Apply a sprinkling of baking soda to the sofa, wait for 15-20 minutes and then vacuum.

4. Clean it with steam
What steam does is that it will refresh it. As it steams, any bacteria and germs that are on the couch will be destroyed. Stains will also be lifted if there are any on there. You may find that steam cleaning does not completely remove stains in some cases. If that happens, you will need to go over it with a stain removal product.

Check out this “12 Step Guide to Reupholster a Chair

A guide to cleaning velvet sofas

Velvet used to be out of the question for those with pets and/or children, but these days, easy-care fabrics (most aren’t silk based) allow us to enjoy the luxurious look without having to deal with removing all the marks.

1. Clean all dirt and dust from the surface
The best way to clean a velvet sofa is by gently vacuuming it in circular motions. Another option is to use a lint roller to do the job quickly and easily – but you still need a vacuum for the hard-to-reach areas and underneath cushions.

2. Take a brush to it
Velvet-specific brushes are available which are perfect for maintaining the sofa’s sheen. When brushing, follow the pile’s direction.

3. Steam it
The manufacturer’s label will tell you whether water can be used on your sofa, so check the label before using the steamer. To prevent damaging the fabric, always use a low setting and move the steamer constantly.



How do I remove stains from my sofa?

Spills and stains must be dealt with quickly. The best way to remove a stain is to blot the fabric with water and paper towels immediately after it happens. Rubbing the spot may cause the stain to spread further. Using soapy water and a clean white towel, blot the colour until it disappears. Afterwards, dampen a colourfast cloth with boiled water from the kettle and wipe the entire panel or cushion from one seam to another to avoid water marks. As the fabric dries, this will help prevent any water stains.

What is the recommended frequency of cleaning a sofa?

In spite of how easy it is to ignore upholstery cleaning until you spill something or a stain appears, it is important to clean your sofa regularly to keep it looking as good as new; given how often your sofa is used and how much dirt and dust can build up, you should give it a nice clean every week. Your sofa’s colour and fabric will last longer if you vacuum it frequently to remove any dust or dirt.

Although you will do your best to maintain your brand-new sofa as spotless as the day you received it, over time some pesky stains are inevitable. Most of the time, you won’t have to perform a top-to-bottom deep clean, but we recommend frequent spot cleaning and fabric protection to ensure your sofa stays fresh and clean.

Here are some cleaning products that you can find at Home Depot.

Check out our recent post “The Coolest Accent Wall Ideas

Chair Reupholstery – A 12 Step Guide to Reupholster a Chair

Chair Reupholstery – A 12 Step Guide to Reupholster a Chair

DIY Upholstery Tips For Reupholstering Chairs

You can’t bear to throw out some of your beloved furniture? DIY chair reupholstery may be a great option if you want to refresh an old chair without spending much money.

To help you get started on your DIY chair reupholstery project, we will go over some of the basic tips for upholstery. This comprehensive beginners guide to upholstery will teach you everything you need to know before you get started, from selecting the right tools to checking the inside structure of your furniture.

Get the Right Tools for Reupholstery

One of the most important tips is to ensure that you have the right tools, because without them, you can’t do a decent job. Your finished product will also thank you for choosing the right tools since they will make your life easier. This will result in results that are professional-looking!

Some of the things you need will depend on the project you are going to do of course. If you are going to reupholster a simple dining room seats for instance, you may only need a staple gun and scissors.

For a Basic Upholstery Project, You Will Need Just a Few Tools:

Upholstery StaplerUpholstery Stapler

Upholstery guns come in three different types, the most popular being the pneumatic staple gun. Don’t just pick the cheapest option because you might regret it! Choose this type to make the job much simpler and faster.

tack hammerUpholstery Hammers

Nails can be added to upholstery to add a final touch. As well as covering any visible staples, these can also be used as decor to enhance the look of the furniture. Hammers are required for this task.

Fabric ScissorsFabric Scissors

Good quality fabric scissors are essential for getting straight lines and avoiding tearing the fabric.

fabric markersFabric Markers

You will need fabric markers to mark where the fabric and padding needs to be cut. It’s a good idea to get a set with different colors so you can easily see the lines on any fabric color. Chalk can also be used but again you will need at least a few colors.

Staple RemoverStaple and/or Nail Remover

In many cases you will need to remove the old fabric and it will be attached with nails or staples. This tool will make the task much easier.

Choosing Your First Reupholstery Project

While being enthusiastic is great, if you’re just beginning to reupholster furniture, you shouldn’t choose expensive, larger, or important pieces to start with. Start with small projects until you feel confident enough to take on larger ones.

diy reupholstery - dining room chairsTaking on a large piece of furniture may prove too challenging for you, and this may keep you from upholstering for quite some time. If this is your first upholstery project, choose something simple like small like a bar stool or dining room seat.

There will be less pressure to get it right the first time, so you can have more fun with it and any mistakes won’t be as disastrous.

Significant pieces of furniture like sofas and accent chairs will likely require some sewing. If you’re not able to do the necessary sewing, then you can try to find someone to do the sewing or hire a professional.

Here’s an excellent video that takes you through the whole process of reupholstering a dining room seat:

Dining Room Chair Reupholstery in 12 Steps

  1. Remove the screws underneath the dining room chair that secure the seat to the dining room chair frame.
  2. Remove the existing fabric using a staple or nail remover. If your chair seat has a complex shape, keep the old fabric it intact so that you can use it as a pattern to cut the new fabric.
    In some cases you might be able to place the new fabric over the existing fabric instead of removing the old fabric. Doing so often makes it difficult to fold the corners nicely. If you think it could work and you have some extra fabric, give it a try. 
  3. Place the dining room seat on the fabric with the top side facing down. The seat should be placed so that it is about 3 to 4 inches from the edges of the fabric. Don’t worry about getting it exactly right. Make adjustments before cutting.
  4. The fabric should be cut 3 to 4 inches from the cushion’s edges. This much fabric will be required to cover the cushion completely. Wrap the edges of the fabric up and over the edge of the seat to find out where to cut. Once the fabric is marked, cut it.
  5. Attach the upholstery to the seats by stapling it in the middle of each side. Take hold of the fabric on the seat’s one side and pull it up and over the edge. Put a staple at the center of the edge of the seat to secure the fabric.
    Repeat this process on the other three sides of the seat. The upholstery should be stapled to the underside of a round seat in four equidistant locations, such as at 12 o’clock, 3 o’clock, 6 o’clock, and 9 o’clock.
  6. Work your way out from the corner while pulling and stapling the fabric. Select one side to work on first. Hold the fabric next to the first staple on the inside of the seat. Continue stapling along the edge of the seat going out toward the corner, and then do the other side. The fabric at the corners should not be stapled yet.
    Make sure you do this on both sides of the seat.
  7. Fold the fabric at the corners and staple in the center of the fold. Once the fabric is secured along the sides, choose a corner and fold the fabric over at the corner to gather it. Then, fold the fabric again, and staple the fabric a couple of times at the center of the fold to hold it in place.
    Repeat this process for the remaining corners.
  8. The excess fabric should be cut off 1 inch from the staples on each side. After the fabric has been secured at the corners, cut the fabric 1 inch from where the staples are. In this way, the excess fabric will not hang down.
    It is important not to cut too close to the staples or the fabric may come loose.
  9. Make a dust cover by dust cover cutting the fabric to the same dimension as the seat. Cut along the edges of the fabric once it is placed over the back of the seat.
    If you are cutting out the dust cover fabric, be careful not to cut through the upholstery fabric.
  10. The dust cover fabric should be folded under and stapled to the seat. The dust cover fabric should be folded on one side of the chair and stapled in place. Start by stapling the center of one side of the fabric and then work your way outward.
  11. To secure the dust cover, repeat this process all the way around the chair’s edges.
  12. You are now done with reupholstering your dining chair! Now reattach the seat to the chair frame using the saved screws.

Don’t Forget the Inside

If this is your first project, you should choose a project that focuses on updating the outside. With that in mind, make sure the insides are in good condition or else you should consider a different piece of furniture for your first project.

If you do choose a fully upholstered chair like an accent chair then you need to be aware of other potential problems on the inside, underneath the fabric.

Sit on the furniture piece to test how sturdy and solid it feels. If the frame is wobbly at all then the frame will need some reinforcements. If you are handy you may be able to resolve the issue with some glue and screws to make the frame solid.

The other important to check for is whether it feels too hard or too soft when you sit in it. These are signs that there are problems with the springs, webbing or padding on the inside. These kinds of problems should be left to a professional but again, if you are handy you could investigate it further and see if you can figure out what to do.

If your chair has a loose seat cushion, remove it and run your hands along the surface of the seat. Push down as you run your hands along. You will probably feel springs as you push down. Better quality furniture will have coil springs or zig-zag springs. Do you feel irregularities?

If there is a loose or broken spring it should feel quite obvious. It could just be detached from the frame which you could fix fairly easily. If it is actually broken, it will need to be replaced and this could be difficult to find depending on how old the furniture is. You will have to strip off the old fabric and padding down to the frame in order to see and repair the springs.

Here’s a video that explains how to install Zig Zag springs on a chair:

Is the Chair Worth Reupholstering

There are some things to take a look at before you decide whether or not you should proceed with a particular chair. Watch this video:

If you are going to reupholster a simple dining room seat, you might be able to just recover the seat with new fabric over to of the existing fabric. In some cases where the seat is a snug fit within the chair frame this might not be possible. In that case an most reupholstery cases, you will need to strip off the old fabric.

Make a Pattern

When you do strip off the old fabric, try to keep it intact so that you can use it as a pattern to cut the new fabric. This is especially important for more complex reupholstery projects.

Be Picky With Fabrics

Take the time to find some fabric you really like and make sure it is good quality. Consider a dark fabric to reduce the visibility of stains and water-resistant fabrics are also a good idea to protect your chair from spills.

It’s not worth the effort of upholstering an item of furniture if the fabric is only going to last a short time or tears as you’re working on it. You could give your furniture a new lease on life for many years to come if you choose a fabric that won’t tear easily and is durable enough to withstand years of use.

If you have doubts about whether a fabric is good quality and adequate for your upholstery project, just ask the supplier before purchasing.

diy reupholstery - bar-stoolStart Small

As mentioned earlier, if this is your first project, it is a good idea to do a simple project like a bench seat, bar stool or dining room seat.

Once you have done a few simple projects and you feel ready to try more challenging upholstery projects, here is a list of other tools you may need…

Upholstery Tools for More Advanced Projects

Upholstery Stripping and Internal Repair Tools

Upholstery MalletMallet

A mallet is sometimes needed to help remove staples during the furniture stripping process. An upholsterer will use the mallet to hit the tool’s end for extra force when using a staple puller alone to remove a staple. As you remove a staple with a mallet, be sure to move your hand out of the way ahead of time and slant away from it as the staple could come flying at you.

Staple RemoverStaple Pullers

Staple pullers help remove staples from upholstery fabric so that it can be stripped. The two prongs can be inserted under the staple, and the handle can then be pulled out to remove it.

tack lifterTack Pullers

A tack puller or tack lifter is used in the upholstery process to remove any tacks holding fabric in place, so that the old fabric can be discarded and the layers beneath can be inspected.

Flat Nose PliersFlat Nose Pliers

Upholsterers use flat nose pliers to straighten bent wires, which is necessary when taking apart furniture to remove old springs.

Ripping HammerRipping Hammer

The purpose of ripping hammers is to remove old fabric and staples by cutting each edge at a specific angle.

Spring Clip PliersSpring Clip Pliers

When you need to repair springs, you will need spring clip pliers.

Pulling PliersPulling Pliers

Pulling pliers will make your life easier when you need to remove a lot of staples. With the pliers’ angle, it is easy to insert underneath a staple, grasp it, and remove it, even in narrow spaces.

tack hammerTack Hammer

Webbing is secured with tacks with the help of tack hammers. You can hold the tack using the magnetized split end of the hammer before hammering.

Webbing StretcherWebbing Stretchers

Stretchers for webbing allow upholsterers to attach webbing close to the frame of furniture. Attaching new webbing or tightening existing webbing can be accomplished with this tool.

Tools to Repair Upholstery Springs

Spring End FormerSpring End Former

A spring end former is a tool used to bend a spring end so that it does not dislodge from a spring clip at the end of a furniture piece.

klinch-itKlinch-It

With Klinch-its, upholsterers no longer have to sew springs to webbing because they can attach them using steel clips instead of stitching.

Spring StretcherSpring Stretcher

With a spring stretcher, you can position sinuous springs with a lever. Attach the spring to the frame on one side, attached a hook to the spring’s next-to-last loop, and slowly pull the lever to position it.

Wire CuttersWire Cutters

Wire cutters are used when you need to replace springs so you can cut them down to the right size.

Tools to Repair Stuffing And Padding

Foam Fabric Upholstery Leather Aerosal Adhesive Glue SprayAdhesives

In order to attach foam, stuffing, and padding to other materials or surfaces, spray adhesives are used.

Upholstery RegulatorUpholstery Regulator

As the stuffing layers are stacked, upholstery regulators smooth out any irregularities. Regulators for upholstery come in various lengths and gauges, just like needles.

Upholstery Filler BazookaFiller Bazooka

With a filler bazooka, you can fill pillows, pillow backs and cushions quickly and efficiently. Simply place the blower’s back end on top of the container, and its front end into the cushion or whatever item you need to fill. With this tool, you can fill your mattress with shredded foam, kapok, styrofoam pellets, down, and many other loose filling materials.

Final Upholstery Finishing Tools

Upholstery StaplerStaple Gun

A staple gun is probably the most used tool so a good quality staple gun is essential.

Fabric ScissorsScissors

There is a lot of fabric cutting to be done during the upholstery process so upholstery scissors are an essential tool.

Hot Glue GunHot Glue Gun

The final finishing or creasing detail is sometimes fixed with a hot glue gun.

Curved Needle KitCurved Needle Kit

When slip-stitching cushions, attaching outer fabric sections, working on seat edges, and making edge rolls, curving needles are used.

Decorative Nail GunDecorative Nail Gun

Furniture is decorated with decorative nails using decorative nail guns by upholsterers. To avoid frequent reloading, store a few decorative nails in the hopper of the nail gun.

Seam StretcherSeam Stretcher

Upholsterers use seam stretchers to smooth out wrinkles before blind stitching. In addition to cutting large circles, you can also use this tool to sew blind stitches.

tack hammerTack Hammer

Using the same hammer as for webbing, tacks can be hammered into place to hold the fabric in place.

Upholstery RegulatorUpholstery Regulator

In order to properly shape a cushion, upholsterers poke a sharp end of an upholstery regulator through the fabric, reposition the filling, and push the cushion into corners or curves after applying the top cover. To finish pleats or corners, or to tuck fabric under metal tack strips, the upholstery regulator’s flat end is used.

Upholstery Sewing MachineSewing Machine

The need for a sewing machine will naturally depend on the project but an upholstery grade sewing machine is an essential tool for anything beyond basic upholstery projects.

Button Press for fabric covered buttonsButton Press

To make custom-fitted, fabric covered buttons for upholstery projects, upholsterers use a button press. For the use of a button press, button die cutters are also needed.

Button Die CutterButton Die Cutters

A button press is used in conjunction with a die cutter to cover buttons with fabric. Various sizes are available to create the appropriate size fabric for the button.

Practice makes perfect!

Developing skills takes time, and the more time you spend on it, the better you will become. With these tips, you should feel confident enough to start your first diy chair reupholstering project.

Where can you get all these upholstery tools?

Amazon is of course a great resource for most of the tools you need. Also, be sure checkout Upholster.com and diyupholsterysupply.com

Where to buy upholstery fabric?

You can find just about anything you need in upholstery fabrics at Fabric.com or Joann Fabric

You might also like “5 Easy DIY Home Projects That Add Wow Factor” and “How to Clean a Sofa

 

Pin It on Pinterest